Shannon and Stephane 3D Photo

To make this picture we took to different pictures both 3 inches apart from each other. With each picture we changed it on photoshop and then we adjusted the photos to make sure that the final picture popped out correctly.  The reason this works is because when you put on the 3D glasses they carry both the red and blue filters. The blue filter blocks out red and green and the red filter blocks out green and blue. Together with these two colors it brings out the red and blue in the photo and makes them pop out.

shayne and carolyn

this photo illustrates when you combine colors what new color appears. for example when you mix red and blue you get magenta. the yellow is a secondary color so when you combine it with blue it looks like cyan since to make yellow you need green and green plus blue creates cyan.

3D Picture: Charley Saram & Jimmy Binder

I made the picture by following the instructions on a website. I took two pictures of the bucket of apples. One picture I moved it so it would be slightly off center. The 3D effect works using colored filters because when seen through the glasses, both lenses have different perspectives that accomodate to each filter. To see it 3d, put on glasses.

Mack Blajda

 In this picture I had two white lights shining on a whiteboard. I put two filters over the lights. One color was blue and the other color was red. When the two white lights were shinning the middle of the whiteboard turned magenta which is the combination of the two colors, Red and Blue.

Shannon Fuchs

Color Addition is when you mix together primary colors and produce new colors. I took the two primary colors, blue and red, and placed the two filters next to white light. By doing this the two colors created magenta (as shown in the picture).

Stephane Antonopoulos

We used the two colors: Magenta and Yellow in which they created the color red. The reason this happen was because it demonstrate color subtraction. The way this happened was by placing the magenta filter, which only allows blue and red light through, on top of the yellow filter, which only allowed green and red light through. With these two filters both blue and green were subtracted and then it only allowed the color red to transmit. 

Charley Saram Color

Color

I made a yellow shade. Using green and red filters i made yellow in the middle. i put the red filter to a light and the green filter to the light to make yellow in the middle. you can see both the green and yellow and red all in the picture. since it is on a white bored the red and green mixed together and just like the color wheel, it made the yellow color. 

Jimmy Color Addtion

In this photo I made Magenta using two filters. The two filters I used was blue and red. I had two white lights and held up the filters to each of them. One light reflected red and the other blue. Both being reflected on a white bored they mixed as they should to make magenta in the middle. You can see all three colors in the picture above. Blue in the top right red on the bottom and magenta in the middle.